Rooftop
Rooftop solar arrays
Grid-tied panel arrays mounted, flashed and wired on residential and small-commercial roofs across the Valley.
Who we are
A Fraser Valley crew that lives on the roof.
The Valley gets long, bright summers — and a lot of roof facing the right way to use them. E3 Solar is a local solar-installation company that designs each system around the actual house: the roof pitch, the shading, the panel and the way your home pulls power through the day.
We handle the whole job in-house — the assessment, the mounting and array, the electrical tie-in, and the permits and inspection that come with it. When it's done you can watch what the roof is making, panel string by panel string.
The Sun Ledger
How an install runs, start to switch-on.
No mystery and no surprise truck rolls. Here's the order of work for a typical rooftop system, walked by hand.
Site assessment & shading study
We look at the roof in person — orientation, pitch, condition, and how trees and neighbouring rooflines shade it across the day and the seasons. That sets how many panels fit and where they'll actually produce.
System design & sizing
We size the array to how your home uses power, lay out the panel strings to dodge the shade, and design it grid-tied and battery-ready so storage can be added later without re-doing the work.
Permits & mounting
We pull the permits, flash and mount the rails to the roof structure so it stays weather-tight, and set the panels in clean, square rows that look like they belong on the house.
Electrical tie-in & inspection
The array is wired to the inverter and tied into your panel to code, then signed off at inspection before it's energized — nothing goes live until it passes.
Switch-on & monitoring
We commission the system, walk you through the monitoring, and leave you able to see exactly what the roof is producing — day by day, string by string.
What we install
Built for Valley roofs.
Rooftop is the heart of it, but we take on the systems around it too.
Ground-mount
Ground-mount systems
For properties with the land and the sun — racked arrays set in the yard where the roof can't carry the system.
Battery-ready
Storage-ready design
Every array is laid out so battery storage can be added later — keep more of what your roof makes for the evening.
Service
Repairs & re-roof moves
Panel removal and re-set for re-roofing, plus diagnostics when an existing array stops producing what it should.
Monitoring
Production monitoring
See what the system is making in real time, with alerts if a string ever drops off so you're not flying blind.
Commercial
Small-commercial
Larger arrays for shops, shops-with-suites and outbuildings — same in-house crew, same clean rows.
Recent work
The roofs, the rows, the rails.
A few stock placeholders standing in for the kind of work we'd show here — we'd swap in your real project photos before launch.
Get started
Request a quote.
Tell us about the roof and where you are in the Valley. We'll set up a free site assessment and shading study.
Service area & hours
AbbotsfordPrimary area
ChilliwackPrimary area
Mission & Fraser ValleyBy arrangement
Site assessmentsMon–Sat
Free assessmentYes